Automatic transfer switch is a high-tech product developed by our company,Comply with GB/T14048.11Standards, also in line with 《Fire Protection Code for High–Rise Civil Buildings》, 《Emergency Lighting Design Guidelines》etc.The parts and components of the product have undergone strict aging and screening. The finished product has been energized and aged at a continuous high temperature for 24 hours, and finally passed the loading inspection before leaving the factory. Thus ensuring the reliability and safety of the product .
Suitable for AC 400V and below, rated frequency 50Hz. In the power supply, there is phase loss, overvoltage, Under the control of the controller, the transfer switch can quickly change the load from the common power supply to the backup power supply (the backup power supply must be normal at this time) in the case of fault conditions such as undervoltage. The user can also put the load in an intermediate position when needed, so that the load is neither connected to the normal power supply nor to the standby power supply.
Automatic transfer switch is a high-tech product developed by our company,Comply with GB/T14048.11Standards,also in line with Fire Protection Code for High-Rise Civil Buildings>,&Emergency Lighting Design Guidelines etc.The parts and components of the product have undergone strict aging and screening.The finished product has been energized and aged at a continuous high temperature for 24 hours,and finally passed the loading inspection before leaving the factory.Thus ensuring the reliability and safety of the product. Suitable for AC 400V and below,rated frequency 50Hz.In the power supply,there is phase loss,overvoltage,Under the control of the controller,the transfer switch can quickly change the load from the common power supply to the backup power supply (the backup power supply must be normal at this time)in the case of fault conditions such as undervoltage.The user can also put the load in an intermediate position when needed,so that the load is neither connected to the normal power supply nor to the standby power supply. This product is mainly used for the primary and secondary loads specified by the state,and is widely used in fire-fighting,post and telecommunications Information,hospitals,hotels,urban rail transit, high-rise buildings,industrial assembly lines,television stations,etc. Places with continuous power supply.Commonly power sources can be power grids,self-starting generator sets,battery packs,etc.