LVMA ATS C(N) Type Dual Power Automatic Transfer Switch PC Class ATS Controller 3P 4P 630A

The components of the product undergo strict agingscreening, and the finished product is powered on for 72 hours. After passing the inspection, It can be packaged. Thereby ensuring the reliability and safety of the product.

This product is mainly used for the primary and secondary loads specified by the state, and is widely used in an important place to supply power continuously. Such as fire protection, post and telecommunications,Communication, hospitals, hotels, urban rail transit, high-rise buildings, industrial assembly lines, television stations, etc.

The main and backup power sources can be the power grid, the self-starting generator set, the battery group and so on.

Product structure

The product consists of two parts: the switch body and the intelligent ATS controller. The switch body with an electrical and mechanical interlock.

The product used solenoid actuate, double wire loop DC pulse operation, The operation power of the conversion controller adopts the line voltage 220V of main standby power supply.No additional control power.

Product model and meaning

N type Product introduction

1. N type (32A-125A wiring type)

2. N type product electrical schematic diagram

Note: In the absence of a dedicated ATS controller, the two power sources in the controller circuit can not be simultaneously energized.

3. N type (32A-125A) Product Installation Dimension

Type	Dimension
	A			B			C	D	E	F	G	H	HJ	J	K
	2P	3P	4P	2P	3P	4P	C	D	E	F	G	H	HJ	J	K
32N	170	197	224	150	177	204	184	167	12	27	3	110	155	5	9
125N	191	228	265	171	208	245	184	167	20	37	3	110	155	8	9

4. N type(32-125A) Technical Data

Rated working current(A)		16	20	25	32	40	50	63	80	100	125
Rated control voltage (V)		AC220
Rated control current (A)		3.5
Rated short-time withstand current (KA)		10
Service life	Mechanical life	20000
	Electrical life	6000
Operating cycle (1minute /times)		10

N type (160A-630A) product introduction

1. N type product electrical schematic diagram

Note: In the absence of a dedicated ATS controller, the two power sources in the controller circuit can not be simultaneously energized.

2. N type (160A-630A) Product Installation Dimension

Type	Dimension
	A		B		C	D	E	F	G	H	H1	J	K
	3P	4P	3P	4P	C	D	E	F	G	H	H1	J	K
250A	322	372	302	352	294	200	20	49	5	146	295	8	10
400A	352	402	332	382	294	200	30	59	6	146	295	10	10
630A	352	412	332	392	294	200	35	59	6	146	295	12	10

3. C/N type(160A-630A) Technical Data

Rated working current(A)		160A	180A	200A	225A	250A	315A	350A	400A	500A	630A
Rated control voltage (V)		AC220
Rated control current (A)		7
Rated short-time withstand current (KA)		10
Service life	Mechanical life	17000
	Electrical life	6000
Operating cycle (1minute /times)		15

Model	Type
	LMS1-32N			LMS1-125N			LMS1-400N
Rated Current(Amp)	16A～32A			40A～125A			160A～630A
Rated Control Current(Amp)	5A						7A
Rated Short Circuit Current(Amp)	10A
The Rated Impulse with Stand Voltage(KV)	8
Usingzation Category	AC – 33B
Mechanical Life	20000						17000
Electric Life	6000
Pole	2P	3P	4P	2P	3P	4P	3P	4P
Weight(kg)	3.2	3.7	4.2	4	4.5	5.5	18.5	20.5
Operating Cycle(S/Time)	10

LVMA ATS C(N) Type Dual Power Automatic Transfer Switch PC Class ATS Controller 3P 4P 630A

PC Class Automatic Transfer Switch